What domains and ports should be whitelisted / unrestricted for the AFX to connect properly to the internet?

• Related Articles

• Connecting to an AFX using the local network

  To test if an AFX has successfully connected to the local network, connect another device to the same network, and then type the following into a browser (capitals matter): "internal IP"/afx/index.php?device="Hostname". For example: ...

• How do I safely and properly power cycle the AutoFlex Connect?

  How to safely power cycle the AutoFlex Connect Note: If the control is frozen or the touchscreen is not working for some reason, skip to step 3. 1. Go to Menu -> Administration -> Diagnostics. 2. Press Shut Down Display. The control goes through a ...

• Can the AFX monitor electrical installations to prevent fires?

  The AutoFlex Connect 2 has options for current sensing, which can be used to monitor over current conditions for certain loads, and alarm/turn load off.

• Does the SUPRA-TOUCH have Misting and Fogging logic similar to the ECC-1/AFX?

  As of version 1.12 the Supra-Touch has misting and fogging capabilities like the AutoFlex Connect. If you are on an older version, download the latest version from the product page: https://www.phason.ca/supra-touch.htm

• Does the LB White Smart Sense heating work with the AFX?

  Yes, the AutoFlex Connect can control a LB White Smart Sense heater, it will use (1) variable DC output. Setup as Variable Heating. Note: The modulating control valve does not open until 5V dc. Keep this in mind when programming controls for use with ...