Connecting to an AFX using the local network

Connecting to an AFX using the local network

To test if an AFX has successfully connected to the local network, connect another device to the same network, and then type the following into a browser (capitals matter): "internal IP"/afx/index.php?device="Hostname".

For example: 192.168.1.10/afx/index.php?device=AutoFlex-123456

    • Related Articles

    • Local database error

      If your AutoFlex is displaying a local database error, follow the link below to find a troubleshooting flowchart to help diagnose and solve the issue. https://phason.ca/img/kb/005/database-error.html

    • Updating AutoSort Connect using a USB drive

      Update AutoSort Connect using the USB drive 1. Download the update files Install_ASC_USB.zip. 2. Log in to the control. 3. Eject the USB drive (Administration > Diagnostics > Eject USB). 4. Press Yes. DO NOT press Okay yet. 5. Remove the USB drive ...

    • Can I run OMNI-SELECT using two computers at once?

      No this will not work, as OMNI pushes the settings to the sorters, and will not sync with another computer also running OMNI.

    • Touch screen issues with 1st generation AFX

      If you are having issues with your 1st generation AutoFlex touch screen, follow the link below to find a troubleshooting flow chart to help diagnose and fix the issue. https://phason.ca/img/kb/006/touchscreen-issues-gen1.html

    • Can the AFX monitor electrical installations to prevent fires?

      The AutoFlex Connect 2 has options for current sensing, which can be used to monitor over current conditions for certain loads, and alarm/turn load off.