Why is there a delay when I switch from manually overriden Open to Close?

• Related Articles

• Curtain opens when it should close or closes when it should open

  Problem Curtain opens when it should close or closes when it should open Possible Cause Incorrect wiring, the close and open wires are reversed. Possible Solution Correct the wiring.

• Curtain opens when it should close or closes when it should open

  Problem Curtain opens when it should close or closes when it should open Possible Cause Incorrect wiring, the close and open wires are reversed. Possible Solution Correct the wiring.

• Relay does not switch load off

  Problem Relay does not switch load off Possible Cause The relay is configured as ON Possible Solution Configure the relay properly.

• Relay does not switch load off

  Problem Relay does not switch load off Possible Cause The relay is configured as ON Possible Solution Configure the relay properly.

• Fans turn off and actuators close when zone temperature rises

  Problem Fans turn off and actuators close when zone temperature rises Possible Cause Tunnel mode is active Possible Solution Set tunnel turn off to "No" for stages you do not want affected by tunnel mode.