If
you have the Enable OMNI Select option Enabled, then the Factory Default button
is removed. To Factory Default the unit through the unit interface you must
first Disable the Enable OMNI Select option.
When an Autosort Connect has Omni-Select integration enabled, you cannot trigger a factory reset/default. Disable the Omni connection option to do a factory reset.
The controller is not seeing the PHASON USB. First try remounting it via the software. If no success, this means that the PHASON USB is either physically removed, or not making a good connection, or has failed. Start by ensuring it’s physically ...
To load the factory defaults: 1. Scroll to the advanced menu and then press Select. Enter your PIN to continue. 2. Scroll to the Maintenance Menu and then press Select. 3. Scroll to Defaults and then press Select. A Confirmation display appears. 4. ...
The AutoFlex Connect has a 2.4Ghz Wi-Fi connection. The iPhone Personal Hotspot uses a 5GHz connection by default. On iPhone 12 or later, you can turn on Maximize Compatibility for Personal Hotspot to use a 2.4GHz connection.