Why is my AutoFlex Connect screen blank or blue on startup?
If the screen of your AutoFlex Connect turns on and then goes blank or blue when starting up, the backup battery in the control may need to charge. Open up the control and look at the back of the display for the board with the small fan. If L1 and L2 LEDs are rapidly flashing, the battery needs to charge. Keep the control powered on to charge the battery. Depending on how dead the battery is, this could take several hours. The control will automatically start up once the battery has enough charge to safely start.
Related Articles
Why is My AutoSort Connect screen blank on startup?
If the screen of your AutoSort Connect turns on and then goes blank when starting up, the backup battery in the control may need to charge. Open up the control and look at the back of the display for the board with the small fan. If L1 and L2 LEDs ...
Blank screen issues
If you are experiencing a blank screen on your AFX Connect controller, follow the link below to find a troubleshooting flow chart to help diagnose and fix the issue. www.phason.ca/img/kb/007/007-blank-screen.html
Autoflex Connect 2 LED troubleshooting
LED Behaviour in the AutoFlex Connect 2 Modules Expected behaviour: Heartbeat green LED slow blink (one second on, one second off). Fault behaviour (No communication with communication controller board): Heartbeat green LED fast blink (on and off ...
How to get rid of OSD display settings menu that appears on my AutoFlex Connect?
The AutoFlex Connect display has its own built-in settings menu (OSD) for contrast, brightness, etc., like any other monitor or display. This is set at the factory, and should not appear on its own. If the menu ever appears, try carefully ...
Stuck on PHASON screen
The most common reason for a unit to be stuck on the PHASON screen during boot up is issues reading the PHASON USB. This could be a sign that your PHASON USB has become write protected, or damaged, and the computer is getting stuck trying to read it. ...