Where do I configure regular curtains with no feedback?

• Related Articles

• How many Inlets and Curtains can I control?

  The Supra-Touch can control up to 6 “curtains”, or as it’s called in the control “Inlets no feedback”. The max for “Inlets with feedback” (potentiometer) is 2.

• How many curtains can the Plus-Touch control?

  The PLUS-TOUCH can support up to 2 independent actuator or curtain devices utilizing feedback. If no feedback is required, you can control multiple curtains as a single curtain stage on the controller. External contactor may be required. Devices ...

• Can I use the VCM-DC with a chimney fan that does not have a feedback measuring fan?

  Yes! When configuring the VCM-DC output, you can configure it in either feedback mode, or no feedback mode. In no feedback mode there is a user-defined ratio for fan speed to damper position. The default ratio is 2, which means that a fan speed of ...

• Setting up an Inlet / Actuator / Curtain WITH Feedback

  Setting up an actuator in AutoFlex Connect These instructions are for actuators that require a feedback signal and will be programmed for traditional staged ventilation. The two main steps are configuration and programming. Configuration 1. Go to the ...

• Setting up an Inlet / Actuator / Curtain WITHOUT Feedback

  Setting up an actuator without feedback These instructions are for actuators that do not require a feedback signal and will be programmed for traditional staged ventilation. The two main steps are configuration and programming. Configuration 1. Go to ...