What triggers an actuator jammed alarm?
When an actuator tries to move for 20 seconds and the ADC value does not change by at least 5 an actuator jammed alarm is triggered.
Related Articles
Alarm Codes and Error Messages
ALARM MESSAGE POSSIBLE CAUSE POSSIBLE SOLUTION High Temperature Alarm The temperature has gone above the high temperature alarm point. Try to lower the temperature by turning heaters down or off, or by increasing or turning on cooling elements (such ...
Alarm Codes and Error Messages
ALARM MESSAGE POSSIBLE CAUSE POSSIBLE SOLUTION High Temp Probe 1 High Temp Probe 2 High Temp Probe 3 High Temp Probe 4 The temperature associated with a probe has gone above the high temperature alarm point and past any alarm biasing. Try lowering ...
Actuator de-icing clarification
Actuator deicing will move the actuators a certain distance and back to their position as per the settings every few hours in order to break up any potential ice build up on the inlets.
Alarm relay not operating alarm system
Problem Alarm relay not operating alarm system Possible Cause Incorrect wiring Possible Solution Correct the wiring.
Troubleshooting - Alarm relay not operating alarm system
Problem Alarm relay not operating alarm system Possible Cause Incorrect wiring Possible Solution Correct the wiring.