What is the difference between the AutoFlex Connect and AutoFlex Connect II?

• Related Articles

• How much current does the AutoFlex Connect 2 itself draw?

  For the AutoFlex Connect 2, the ratings are: Control voltage 100 to 240 VAC, 50/60 Hz, 0.9 A WARNING: To be installed with 10 A maximum overcurrent protection or equivalent.

• Is the DOL104 0-10v compatible with the AutoFlex Connect?

  No. The AutoFlex Connect is not compatible with the DOL104 0-10v sensor. The DOL104 0-20mA sensor is unofficially supported. It acts the same as a DOL114, and if that is selected and it is wired up like a 114 it will work, just with only the humidity ...

• Can the AutoFlex Connect-2 control heat lamps?

  To control heat lamps within the AutoFlex Connect-2 you would use a VAC-1 board. https://phason.ca/pdfs/vac-1.pdf Heat lamps can be controlled via a VAC-1 module, assigning the output as “Variable Heating”. Once you have the module configured, the ...

• Why does my iPhone hotspot not appear as an option in the AutoFlex Connect networking page?

  The AutoFlex Connect has a 2.4Ghz Wi-Fi connection. The iPhone Personal Hotspot uses a 5GHz connection by default. On iPhone 12 or later, you can turn on Maximize Compatibility for Personal Hotspot to use a 2.4GHz connection.

• How many auger manager groups can I create in one AutoFlex Connect?

  The maximum number of auger manager groups that can be created in a single AutoFlex Connect is seven. Each group can have a maximum of one main auger and six line augers.