What does an A EE error code mean on my PEC?
The "A EE" error code indicates an issue with the EEPROM (memory). Resetting the unit to factory defaults may solve the issue. If it does not, the unit is permanently damaged and should be replaced.
Related Articles
POFF error - What does it mean?
POFF message is not an error message, but rather a message letting you know there is no probe connected to the corresponding input of the button you press. For example if you push the button "2", it will try to display your temperature for just probe ...
EPF error
On the old PEC-PLUS the EPF error means the EEPROM has failed. To fix this a factory restore is required. Power off the control, and while holding down the up and down arrows, power on the control. If the error appears again, the control likely needs ...
What does the “Check light sensor” error mean?
This error means the control is not seeing a valid reading from the light sensor. Usually, this is a sensor or wiring problem that needs to be fixed.
Alarm Codes and Error Messages
ALARM MESSAGE POSSIBLE CAUSE POSSIBLE SOLUTION High Temperature Alarm The temperature has gone above the high temperature alarm point. Try to lower the temperature by turning heaters down or off, or by increasing or turning on cooling elements (such ...
Can a regular PEC be upgraded to a PLUS-TOUCH?
No, only PEC-PLUS controls can be upgraded to PLUS-TOUCH.