Why is my Supra-Touch temperature reading not changing?

Why is my Supra-Touch temperature reading not changing?

If your Supra-Touch temperature reading is stuck on one single temperature you may have the temperature manually overridden. Go to the Menu, then Manual Override. Either hit Auto All to change all outputs and sensors back to automatic operation, or select the specific temperature probe in question and hit Auto. If an item is manually overridden, there will be a small hand with a slider icon to the left of the item name. If an item is in automatic operation, the icon disappears. Additionally, if an item is overridden the square on the main page around the item icon will be green.

    • Related Articles

    • Why is my Plus-Touch temperature reading not changing?

      If your Plus-Touch temperature reading is stuck on one single temperature you may have the temperature manually overridden. Go to the Menu, then Manual Override. Either hit Auto All to change all outputs and sensors back to automatic operation, or ...

    • Can the Supra-Touch control misting and fogging?

      The Supra Touch has time or temperature-based duty cycles, as well as timed events. A more feature-rich misting and fogging control system can be found in the AutoFlex Connect.

    • Can the Supra Touch measure THI?

      Yes. The Supra Touch can measure and control a zone based on THI as of version 1.12. If you are on an older version, download the latest version from the product page: https://www.phason.ca/supra-touch.htm

    • What are the main differences between the Plus Touch and Supra Touch?

      The Supra Touch has twice the capabilities of the Plus Touch. Supra Touch has 4 variable stages, 12 relays, and can control up to 4 zones. The Plus Touch has 2 variable stages, 6 relays, and can control 2 zones. Another difference is that the Supra ...

    • Why is my VentGrid temperature reading different than my probe reading?

      Do you have a minimum ventilation rate greater than 0% in your VentGrid settings? If you have your minimum ventilation higher than 0%, it will cause the VentGrid to add to the vent rate because the start of the VentGrid will be whatever value greater ...