Is there anything different for configuration in the AFX2 vs the AFX1?
The software is the same, this means that there is nothing different to learn and do when setting up an AFX2 compared to an AFX1.
Related Articles
Connecting to an AFX using the local network
To test if an AFX has successfully connected to the local network, connect another device to the same network, and then type the following into a web browser (Chrome, Edge, etc. capitals matter): "internal IP"/afx/index.php?device="Hostname". For ...
Can I control my floor heating in a different zone?
Yes, the PLUS TOUCH has two available zones, so you can use one for controlling the room's main equipment based off the average of multiple probes, and a second one to control equipment off a different probe.
Why does my heat mat surface measure a different temperature with a temperature gun than is shown on the IMC?
Because the temperature sensor is built into the heat mat, the temperature it measures may be different than the actual mat surface temperature. Use the Sensor Correction setting to adjust the IMC reading to match the temperature gun reading. The ...
Touch screen issues with 1st generation AFX
If you are having issues with your 1st generation AutoFlex touch screen, follow the link below to find a troubleshooting flow chart to help diagnose and fix the issue. https://phason.ca/img/kb/006/touchscreen-issues-gen1.html
Why does my heat mat surface temperature measure a different temperature with a temperature gun than is shown on the HMB?
Because the temperature sensor is built into the heat mat, the temperature it measures may be different than the actual mat surface temperature. Use the Sensor Correction setting to adjust the HMB reading to match the temperature gun reading. The ...