Updating AutoSort Connect using a USB drive

Updating AutoSort Connect using a USB drive

Update AutoSort Connect using the USB drive

1.       Download the update files Install_ASC_USB.zip.

2.       Log in to the control.

3.       Eject the USB drive (Administration > Diagnostics > Eject USB).

4.       Press Yes. DO NOT press Okay yet.

5.       Remove the USB drive that DOES NOT have the yellow warning label.

6.       Copy the update files to the root of the USB drive.

7.       Insert the USB drive into into the same port on the control that you removed it from.
Make sure it is securely in place and then press Okay.


8.       After the USB drive has finished loading, press Install Updates.

The control will update and then return to normal operation. 

    • Related Articles

    • USB missing icon showing

      The controller is not seeing the PHASON USB. First try remounting it via the software. If no success, this means that the PHASON USB is either physically removed, or not making a good connection, or has failed. Start by ensuring it’s physically ...

    • No System Drive Detected on startup

      There is probably an issue with the OS USB. Remake / replace the drive.

    • How to rebuild the OS USB

      This video walks thorugh how to rebuild the OS USB for your AutoFlex Connect or AutoFlex Connect II. https://youtu.be/Vvpy3Pxk7T0

    • Why should I upgrade to the AutoSort-Connect?

      The AutoSort Connect has network connectivity, which allows you to monitor your scale from your phone or tablet. You can view reports and review daily counts from the comfort of your office or home, rather than needing to fight your way through the ...

    • Why is there no factory reset button in my AutoSort Connect?

      When an Autosort Connect has Omni-Select integration enabled, you cannot trigger a factory reset/default. Disable the Omni connection option to do a factory reset.