Fans turn off and actuators close when zone temperature rises

Fans turn off and actuators close when zone temperature rises

Problem
Fans turn off and actuators close when zone temperature rises

Possible Cause
Tunnel mode is active

Possible Solution
Set tunnel turn off to "No" for stages you do not want affected by tunnel mode.

    • Related Articles

    • Can my zone temperature be the average of multiple temperature sensors?

      Yes. All sensors assigned to control the same zone are automatically averaged to calculate the zone reading.

    • How do I calibrate actuators?

      Calibrate actuators by pressing their widget on the home screen and then pressing Calibrate, or by going to their equipment configuration page and pressing Calibrate Actuator.

    • What is the hysteresis for actuators with feedback?

      There is a hard-coded 1% hysteresis for ACT-1 controlled actuators with feedback.

    • Temperature does not change

      Problem Temperature does not change Possible Cause Possible Solution There are no working temperature probes enabled or connected Make sure at least one working probe is enabled. The control is in temperature test mode. If the TEST LED is on, the ...

    • Temperature does not change

      Problem Temperature does not change Possible Cause Possible Solution There are no working temperature probes enabled or connected Make sure at least one working probe is enabled. The control is in temperature test mode. If the TEST LED is on, the ...