Related Articles
Variable fans at full speed all the time
A common issue users have with equipment "not functioning" as expected within the SUPRA is due to someone leaving said equipment in manual override. Due to the state of the equipment being saved when you leave the manual override menu, this means ...
Why is my relay not switching on when I want it to?
Verify that you are looking at the correct relay. Check if the relay will activate and deactivate by using the manual override menu. The TEB-6 uses 24-hour time. Confirm that the time on the control is correct. Note that the daylight savings and ...
After installation - Common issues and process
After installation and registration is completed, users will be logging in with the default username/password. UN: sysadmin PW: omniadmin Once they open and enter into the software, they will either need to restore a previous backup, or set ...
How to load a backup from one control to another?
Step 1 - From the controller with all of the settings you wish to use; Go to Main menu > Administration > Diagnostics > Backup Database Step 2 - From the Diagnostics page, go to Eject USB and push Yes. Step 3 - With this "It is now safe to remove the ...
SB-54 Troubleshooting OMNI Select
Attached is a details document covering several different aspects of OMNI Select. -Troubleshooting communication problems -Complete communication overhaul -Using Toolkit -How to check for devices -Serial Port/Loopback tab -Multi-point PWAs tab ...