How do I control a power open spring return damper?

• Related Articles

• Why did my room / configuration / settings disappear after I power cycled my control?

  If you have a new AutoFlex Connect that is losing configuration or settings when the control is power cycled, you may have left the battery isolation tab in place. This tab prevents the battery from discharging during shipping or when the control is ...

• How do I safely and properly power cycle the AutoFlex Connect?

  How to safely power cycle the AutoFlex Connect Note: If the control is frozen or the touchscreen is not working for some reason, skip to step 3. 1. Go to Menu -> Administration -> Diagnostics. 2. Press Shut Down Display. The control goes through a ...

• Should I switch off the power to add or remove modules?

  Yes. You should always fully power off the control before adding or removing modules.

• Power supply Components blown out

  Problem Power supply components blown out Possible Cause Power surge, brownout, or power outage Possible solution You cannot do anything when it happens, but could avoid problem in future by providing proper voltage and/or protection to the unit.

• Power supply Components blown out

  Problem Power supply components blown out Possible Cause Power surge, brownout, or power outage Possible solution You cannot do anything when it happens, but could avoid problem in future by providing proper voltage and/or protection to the unit.