Can I restore a database generated by a newer version of AutoFlex-Connect onto a control running an older version?

Can I restore a database generated by a newer version of AutoFlex-Connect onto a control running an older version?

No. If you try to restore a database file on an Autoflex-Connect that was created by a unit running a newer version you will cause unknown and often weird bugs.

First update the control with the older version to be the same or newer than the control that generated the database restore file, and then restore.

    • Related Articles

    • Can the AutoFlex Connect-2 control heat lamps?

      To control heat lamps within the AutoFlex Connect-2 you would use a VAC-1 board. https://phason.ca/pdfs/vac-1.pdf Heat lamps can be controlled via a VAC-1 module, assigning the output as “Variable Heating”. Once you have the module configured, the ...

    • Local database error

      If your AutoFlex is displaying a local database error, follow the link below to find a troubleshooting flowchart to help diagnose and solve the issue. https://phason.ca/img/kb/005/database-error.html

    • How much current does the AutoFlex Connect 2 itself draw?

      For the AutoFlex Connect 2, the ratings are: Control voltage 100 to 240 VAC, 50/60 Hz, 0.9 A WARNING: To be installed with 10 A maximum overcurrent protection or equivalent.

    • How do I know which version of AutoFlex Connect I have?

      You can check the version in the About screen. 1. Press the menu. 2. Press About. The Release Version is is displayed at the top of the screen. In this example, it is 3.06.06.

    • How do I save and restore settings?

      Insert a USB into the control, go to the Administration menu, and then select either Save Settings or Restore Settings. For more information, see Saving and restoring settings in the Plus Touch user manual.