iWire - Intermittent comms - Can I adjust the Threshold for communication alarms?

• Related Articles

• How do I set up alerts/alarms?

  You must individually configure the alarms for each piece of equipment. You must also set up the active time and communication methods in the Alert Schedule, found in the Administration menu.

• Why can’t I adjust the set point?

  If the growth curve is enabled you cannot adjust the set point. See To start or stop the growth curve in the user manual for more information.

• How do ACT-1 actuator jam alarms work?

  If the jam alarm is disabled, the system essentially goes into a cycle of constantly turning on the relay in whatever direction it was going to attempt to reach the target position. The jam threshold is: If it takes longer than 20s to reach its ...

• Why can't I adjust the idle speed of my variable fan in my Plus-Touch?

  If you cannot adjust the idle speed of your variable fan, and are just seeing three dashes rather than a number, you have the Minimum Ventilation Curve active for that zone. Go to Menu, Configuration, Zone Control Mode, and disable the Minimum ...

• How do I set up alerts / alarms?

  Check out the Protect Connect playlist on our YouTube Channel for videos detailing the overall flow of setting up the Protect Connect, as well as step-by-step walkthrough videos.