Can I control my floor heating in a different zone?

• Related Articles

• Can my zone temperature be the average of multiple temperature sensors?

  Yes. All sensors assigned to control the same zone are automatically averaged to calculate the zone reading.

• Does the LB White Smart Sense heating work with the AFX?

  Yes, the AutoFlex Connect can control a LB White Smart Sense heater, it will use (1) variable DC output. Setup as Variable Heating. Note: The modulating control valve does not open until 5V dc. Keep this in mind when programming controls for use with ...

• Can the AutoFlex Connect-2 control heat lamps?

  To control heat lamps within the AutoFlex Connect-2 you would use a VAC-1 board. https://phason.ca/pdfs/vac-1.pdf Heat lamps can be controlled via a VAC-1 module, assigning the output as “Variable Heating”. Once you have the module configured, the ...

• Can the FC-1T-2VAC-3F control variable heaters?

  No, the two variable stages are for cooling only. The three relay stages can control either cooling or heating. The Plus-Touch can control variable heaters.

• Fans turn off and actuators close when zone temperature rises

  Problem Fans turn off and actuators close when zone temperature rises Possible Cause Tunnel mode is active Possible Solution Set tunnel turn off to "No" for stages you do not want affected by tunnel mode.