Temperature does not change

• Related Articles

• Temperature does not change

  Problem Temperature does not change Possible Cause Possible Solution There are no working temperature probes enabled or connected Make sure at least one working probe is enabled. The control is in temperature test mode. If the TEST LED is on, the ...

• Does a low or high temperature alarm affect the output?

  No. If there is a low or high temperature alarm the, alarm contacts will change state but the variable output will continue to operate according to the programmed settings.

• Why is my Plus-Touch temperature reading not changing?

  If your Plus-Touch temperature reading is stuck on one single temperature you may have the temperature manually overridden. Go to the Menu, then Manual Override. Either hit Auto All to change all outputs and sensors back to automatic operation, or ...

• Why is my Supra-Touch temperature reading not changing?

  If your Supra-Touch temperature reading is stuck on one single temperature you may have the temperature manually overridden. Go to the Menu, then Manual Override. Either hit Auto All to change all outputs and sensors back to automatic operation, or ...

• Variables do not slow down

  First confirm the operational range of the variable fan by using the Manual Override function under the Test Menu. Then, change StgX Set Point to where you want this fan to start increasing in speed, and then change StgX Differential to the ...