Problem Curtain opens when it should close or closes when it should open Possible Cause Incorrect wiring, the close and open wires are reversed. Possible Solution Correct the wiring.
Air curtain settings This is the status and physical order of the air curtain bags. The numbers correspond with blower numbers in item B. This is the list of blowers, in the order they inflate. The blower button that is selected is the one that you ...
Setting up an actuator without feedback These instructions are for actuators that do not require a feedback signal and will be programmed for traditional staged ventilation. The two main steps are configuration and programming. Configuration 1. Go to ...
No. The ACT-1T uses the current sensor during the calibration process. If the ACT-1T is connected to a contactor that is switching the motors on and off, then it is not getting the current from the load, and will not calibrate or operate properly. In ...