How do I change my motor curve?
From the configuration menu, you will select your variable stage, and then see CL1, CL2, CL3, CL4 options to select your motor curve for this stage.
Related Articles
Why do I get GcEn when I try to change the set point?
The growth curve is enabled. Either alter the growth curve settings as desired, or disable the growth curve and change the set point to the desired setting. Note, changing the set point and then re-enabling the growth curve is pointless. The growth ...
Why would I use a growth curve?
As animals grow, they require less heat from the mat. The growth curve allows you to automate this reduction in set point temperature for the mat. Think of the growth curve as a user defined schedule for reducing the set point temperature.
Why would I use a growth curve?
As animals grow, they require less heat from the mat. The growth curve allows you to automate this reduction in set point temperature for the mat. Think of the growth curve as a user defined schedule for reducing the set point temperature.
Temperature does not change
Problem Temperature does not change Possible Cause Possible Solution There are no working temperature probes enabled or connected Make sure at least one working probe is enabled. The control is in temperature test mode. If the TEST LED is on, the ...
Temperature does not change
Problem Temperature does not change Possible Cause Possible Solution There are no working temperature probes enabled or connected Make sure at least one working probe is enabled. The control is in temperature test mode. If the TEST LED is on, the ...