will the 3k temperature probe work?
Yes a 1k or 3k probe can be configured in the OMNI Software.
Related Articles
Why is my VentGrid temperature reading different than my probe reading?
Do you have a minimum ventilation rate greater than 0%? If you have your ventilation running from something higher than 0% to 100%, that will cause the VentGrid to add to the vent rate because the minimum is 25% and not 0%. The VentGrid will show the ...
Why am I getting multiple repeat alarm emails for the same probe or sensor?
What is happening is that the same probe is going in and out of an alarm state multiple times without the alarm being acknowledged. Each time the probe goes into the alarm state it is counted as a unique alarm. An email will be sent (or re-sent ...
Temperature does not change
Problem Temperature does not change Possible Cause Possible Solution There are no working temperature probes enabled or connected Make sure at least one working probe is enabled. The control is in temperature test mode. If the TEST LED is on, the ...
Temperature does not change
Problem Temperature does not change Possible Cause Possible Solution There are no working temperature probes enabled or connected Make sure at least one working probe is enabled. The control is in temperature test mode. If the TEST LED is on, the ...
Display showing unusually high temperature
Problem Display showing unusually high temperature Possible Cause Possible Solution Extension cable connected to temperature probe is providing a poor connection Check the extension cable connection. Resolder it if necessary. Damaged probe Replace ...