How do I know which version of AutoFlex Connect I have?
You can check the version in the About screen.
1. Press the menu.
2. Press About.
The Release Version is is displayed at the top of the screen. In this example, it is 3.06.06.
Related Articles
Can I restore a database generated by a newer version of AutoFlex-Connect onto a control running an older version?
No. If you try to restore a database file on an Autoflex-Connect that was created by a unit running a newer version you will cause unknown and often weird bugs. First update the control with the older version to be the same or newer than the control ...What is the difference between the AutoFlex Connect and AutoFlex Connect II?
The AutoFlex Connect II comes with an upgraded touchscreen and new enclosure colour. The software is the same for both models. This means there is nothing new to learn when you upgrade to the new AutoFlex Connect II.How do I find the Mac address of my AutoFlex Connect?
Assuming that the AFX has not generated a new Hostname because it had a duplicate hostname (it has generated a new one if the hostname starts with a letter from G-Z), the hostname is made up of the back half of the MAC address. So a hostname like ...How much current does the AutoFlex Connect 2 itself draw?
For the AutoFlex Connect 2, the ratings are: Control voltage 100 to 240 VAC, 50/60 Hz, 0.9 A WARNING: To be installed with 10 A maximum overcurrent protection or equivalent.Is the DOL104 0-10v compatible with the AutoFlex Connect?
No. The AutoFlex Connect is not compatible with the DOL104 0-10v sensor. The DOL104 0-20mA sensor is unofficially supported. It acts the same as a DOL114, and if that is selected and it is wired up like a 114 it will work, just with only the humidity ...