How do I change between heating and cooling modes?

How do I change between heating and cooling modes?

Place the internal jumper in the correct position for the mode you want. See the user manual for more information.

    • Related Articles

    • How do I configure my stages for heating or cooling?

      Stages 3, 4, and 5 can be configured for either heating or cooling. Do this through the Configuration menu. See the user manual for step-by-step instructions.

    • How do I tell if my control is in heating or cooling mode?

      Click the switch to the left. See the user manual for more information.

    • Temperature does not change

      Problem Temperature does not change Possible Cause Possible Solution There are no working temperature probes enabled or connected Make sure at least one working probe is enabled. The control is in temperature test mode. If the TEST LED is on, the ...

    • Temperature does not change

      Problem Temperature does not change Possible Cause Possible Solution There are no working temperature probes enabled or connected Make sure at least one working probe is enabled. The control is in temperature test mode. If the TEST LED is on, the ...

    • What is the difference between direct and indirect evaporative cooling?

      Direct cools animals by soaking them in water that then pulls heat out of them as it is evaporated off of them. Indirect cools the air by inserting and then evaporating water vapour, a process which pulls heat from the air. For a more complete ...