How do I calibrate my actuator?

How do I calibrate my actuator?

Push on the actuator widget, then the Gears icon for settings, then Calibrate Actuator.
    • Related Articles

    • How do I calibrate actuators?

      Calibrate actuators by pressing their widget on the home screen and then pressing Calibrate, or by going to their equipment configuration page and pressing Calibrate Actuator.
    • How do I calibrate an actuator in a Plus-touch?

      Follow comprehensive troubleshooting tree - https://www.phason.ca/img/kb/003/actuator-not-calibrating.html
    • Setting up an Inlet / Actuator / Curtain WITH Feedback

      Setting up an actuator in AutoFlex Connect These instructions are for actuators that require a feedback signal and will be programmed for traditional staged ventilation. The two main steps are configuration and programming. Configuration 1. Go to the ...
    • Older curtains no longer calibrate, what can I do?

      During the calibration of a potentiometer, we call for the OPEN function, and watch the change of resistance from the Pot. Once there is (I believe) a 5 second period of no change, we assume we have hit the end, and call for the CLOSE function, once ...
    • Actuator de-icing clarification

      Actuator deicing will move the actuators a certain distance and back to their position as per the settings every few hours in order to break up any potential ice build up on the inlets.