Would generator testing cause problems with the control?

• Related Articles

• The display shows "PIN" when trying to program the control

  Problem The display shows when trying to program the control Possible Cause PIN security is enabled Possible Solution Enter the correct PIN.

• Can I monitor my generator?

  You can use universal digital inputs to accomplish this, if your generator is compatible with a digital output.

• Why do I measure full voltage output when the control says it should be less?

  The control and expansions need to have a load connected for the triac to give a correct output. If there are no mats (load) connected to the triac output, the output will always read full voltage, no matter what you set the control to. As soon as ...

• Losing communications - possible cause

  It has been found that when a PBx-HMC is programed in OMNI with a Restart Day of "1", that it no longer communicates with the system until that value is changes.

• Can I restore a database generated by a newer version of AutoFlex-Connect onto a control running an older version?

  No. If you try to restore a database file on an Autoflex-Connect that was created by a unit running a newer version you will cause unknown and often weird bugs. First update the control with the older version to be the same or newer than the control ...